Products
Suntay has a complete product classification system to help you find the products you need quickly.
Auto duct line
Automatic air duct production line also called Auto duct line 5, a complete duct production line should achieve the following functions.
1. roll material selection, under the material function; can choose 0.5-1.5mm different thickness or material roll material.
2. Pressing and levelling function; this function is to adjust the process before the processing of the rolled material to prevent the production of waste.
3. Punching, chamfering and grooving function; this function can complete the production of duct installation holes to avoid inconvenience caused by punching later.
4. Cut-off function; this function detaches the sheet from the coil for the next processing step.
5. Transfer function; this function facilitates the automatic processing of the coil material for the next process.
6. Pittsburgh locking; this function realises the crimping operation of the sheet to create joint corners.
7. TDF flange forming; this function is a key step in the production of double-sided TDF flanges.
8. Bending forming; the last process is completed, the TDF flange rectangular duct has been formed.
The company also produces duct line 4, duct line 3, duct line 2, with other manual machines can also be completed rectangular duct production.
Round duct machine
The main machine for the production of round ducts is the spiral duct machine, with elbow making machine, rolling machine, reel machine and other machines to produce round ducts, the production of round ducts are with good sealing, strength and rigidity are good, ventilation resistance is small, ventilation noise is small, round pipe is better than square pipe, easy to install, less connection points, high grade, beautiful appearance. It is suitable for various fields such as ventilation, smoke exhaust and dust removal.
Rectangular duct machine
Shearing machine, TDF flange forming machine, Lock forming machine, folding machine, beading machine and seam closer machine can be used in conjunction with rectangular ducts, with the advantage of a small footprint and low investment. These machines can also be used in conjunction with the duct production line to complete the production of heterogeneous ducts and improve the production efficiency.
Auxiliary processing machine
Auxiliary equipment is used in conjunction with other machines to complete the production of air ducts, or can be applied to the fabrication of other metal sheets.
Damper machine
The automatic fire damper production line can directly form the frame of the fire damper, there is no longer a need to manually weld the four sides of the form, the fire damper automatic production line forming out the product only by riveting or screw inlay form. The frame is directly formed. The electrical control is PL-controlled, with multiple safety protection set up during normal production.