Introduction
TDC and TDF are two common transverse flange connection systems used in rectangular sheet metal ductwork. Both provide an alternative to traditional angle-steel flange connections, which typically require separate cutting, drilling, welding, and attachment operations.
With TDC and TDF systems, the flange can be roll-formed directly from the duct sheet metal, simplifying fabrication and on-site assembly. Although they share similar construction principles, their flange profiles differ in ways that affect handling, forming equipment, and component compatibility.
This guide compares TDC vs TDF duct connections, including their structures, standards, advantages, applications, manufacturing methods, and selection considerations.
1. What Are TDC and TDF Duct Connections?
TDC Duct Connection
TDC stands for Transverse Duct Connector. It is an integral, roll-formed flange system used to join rectangular duct sections.
The TDC profile features an outward-facing hem, positioning the folded sheet metal edge toward the exterior of the flange. Under SMACNA duct construction standards, TDC is identified as T-25a.
TDF Duct Connection
TDF stands for Transverse Duct Flange. Like TDC, its flange is formed directly from the duct sheet metal.
The main difference is that TDF has an inward-facing hem, reducing exposure of the raw sheet metal edge on the exterior side. This can improve handling convenience during fabrication and installation.
TDF is identified as T-25b under SMACNA standards.
2. Common Standards for TDC and TDF Connections
The SMACNA HVAC Duct Construction Standards – Metal and Flexible address TDC and TDF as recognized transverse joint configurations for rectangular ductwork.
Connection type | SMACNA designation | Flange profile |
TDC | T-25a | Outward-facing hem |
TDF | T-25b | Inward-facing hem |
Both systems can be used in ductwork designed for different pressure classes when the completed joint construction meets the applicable requirements.
Compliance depends on factors such as duct dimensions, sheet metal thickness, reinforcement, corner connections, and fastening arrangements. Selecting a TDC or TDF profile alone does not establish the pressure rating or compliance of the finished ductwork.
3. TDC vs TDF: Structural Differences and Characteristics
The principal structural difference is the direction of the flange hem.
In a TDC connection, the hem faces outward and may leave a raw sheet metal edge exposed. In a TDF connection, the hem faces inward, reducing external edge exposure.
Both profiles are formed from the duct sheet itself rather than requiring separately attached angle-steel frames.
Connection Components
TDC and TDF use similar assembly methods. Typical components include:
- Corner pieces: Support and connect the flange corners.
- Fasteners: Secure the corner connections.
- Flange clips or cleats: Hold the mating flanges together.
- Gaskets or sealants: Help prevent air leakage.
Component dimensions and fastening arrangements depend on the selected flange system and construction requirements. Compatibility should be verified before installation.
Advantages and Limitations
| Comparison factor | TDC | TDF |
| Flange construction | Integral roll-formed | Integral roll-formed |
| Handling | Outward hem may expose a raw edge | Inward hem reduces external edge exposure |
| Manufacturing | Requires TDC forming configuration | Requires TDF forming configuration |
| Accessories | Must fit the actual flange profile | Must fit the actual flange profile |
| Strength | Depends on complete joint construction | Depends on complete joint construction |
| Airtightness | Depends on sealing and assembly | Depends on sealing and assembly |
| Cost | Varies with equipment and production conditions | Varies with equipment and production conditions |
4. Applications of TDC and TDF Duct Connections
Both connection systems are widely applicable to rectangular ductwork, including:
- Commercial HVAC: Supply-air and return-air ducts in offices, hotels, shopping centers, and other buildings.
- Institutional ventilation: Ductwork in schools, hospitals, laboratories, and similar facilities.
- Industrial ventilation: Air distribution and general ventilation systems in manufacturing facilities and workshops.
- Prefabricated ductwork: Standardized rectangular duct sections produced using mechanized fabrication equipment.
For applications with strict leakage requirements, high operating pressures, significant vibration, or demanding environmental conditions, the complete joint design must satisfy the relevant project specifications.
The choice between TDC and TDF is therefore influenced more by construction requirements and manufacturing compatibility than by building type alone.
5. How Are TDC and TDF Flanges Formed?
Both TDC and TDF flanges are manufactured through cold roll forming. Sheet metal passes through a series of forming rollers that progressively shape its edge into the required flange profile.
The general fabrication process includes sheet preparation, flange roll forming, duct bending, longitudinal seam closing, and corner assembly. The sequence may vary depending on the production equipment.
TDC vs TDF Flange Forming Machines
The main difference between the machines is the roller configuration required to produce each profile.
TDC flange forming machines produce the T-25a profile with an outward-facing hem.
TDF flange forming machines produce the T-25b profile with an inward-facing hem.
Some conventional equipment configurations use 12 forming stations for TDC and 16 for TDF, although the actual number varies by machine model.
Other important equipment specifications include sheet metal thickness capacity, forming speed, flange accuracy, and compatibility with existing duct fabrication machinery.
Manufacturers should evaluate these specifications according to their production requirements rather than assuming that one forming system is inherently more
Conclusion: Which Is Better, TDC or TDF?
TDC and TDF are both established transverse flange systems for rectangular ductwork. Their primary difference is the hem direction: TDC uses an outward-facing profile, while TDF uses an inward-facing profile.
TDF can offer handling advantages by reducing exposed sheet metal edges, but neither system is universally superior in strength, airtightness, or cost. The most suitable choice depends on project requirements, connection components, and fabrication capabilities.
About Us
Suntay HVAC manufactures TDC and TDF flange forming machines for rectangular duct production. Our equipment supports consistent flange formation and efficient duct fabrication.
Whether you are establishing a new workshop or upgrading an existing production line, contact Suntay HVAC to find suitable flange-forming equipment based on your required profiles, sheet metal thicknesses, and production capacity.


